Upon initial power up of the console, incline shows 40% when incline is actually much lower, and treadmill will not run faster than 3MPH

New consoles may not be properly calibrated with the treadmills incline motor. The console is programmed not to run faster than 3MPH at steep incline settings. Recalibrate the incline on the treadmill. First stand to the side of the treadmill. Enter calibration test mode by pressing both the stop and speed up buttons while inserting the safety key. Next, press the stop button 1 time. Press either incline button 1 time. The incline will then calibrate by moving its full range of motion. When the incline has stopped, remove the safety key. The speed and incline should now display correctly.